Germany Y axis lathe cnc metal turning lathe machine 4 axis FANUC turning lathe machine
Product Description
HT6LMY Universal Turning Center
Machine Description:
HT6LMY CNC Lathe is a four-axis linkage, fully closed-loop CNC Machine Tool. The machine machine-electric-hydraulic integrated layout adopts a fully enclosed protective cover, the door opens to the left, and the operating table is located on the left side, and the ergonomic swing design makes the operation more convenient. Each servo feed shaft adopts high-speed silent ball screw, elastic coupling is directly connected, fast moving speed, low noise, high positioning accuracy and repeated positioning accuracy; the servo motor is equipped with an absolute value encoder, no cumulative error, no memory, No need to find a reference point, the position information will not be lost after the power is cut off. The Machine Tool has strong functions, high precision, reasonable layout, beautiful appearance, easy operation and convenient maintenance.
MACHINE DESCRIPTION & SPECIFICATION
Overall:
The machine tool has a mechanical, electrical, and hydraulic integrated layout. The 45° overall slant bed has the advantages of compact structure, high rigidity, smooth chip removal, and convenient operation. The guide rail type is a rolling guide rail, and the driving parts are high-speed silent ball screws. It has the advantages of fast speed, less heat, and high positioning accuracy; the machine tool is fully enclosed protection, automatic chip removal, automatic lubrication, automatic cooling.
Spindle:
The main drive unit of this machine tool is driven by Japanese FANUC 15/18.5kw high-performance servo motor, which drives the spindle to rotate through a pair of pulleys. The spindle speed range is 30-3000r/min. The front support of the main shaft adopts three high-precision angular contact ball bearings, and the rear support adopts two high-precision angular contact ball bearings with large apertures to meet the bearing requirements of axial and radial cutting forces.
Tailstock:
The Hydraulic Cylinder is used to drive the integral mobile tailstock. The structure is simple, with high precision, high rigidity and reliable performance.
Turret:
The machine used servo power turret by SAUTER, with fast tool change speed and high reliability.
Drive:
The X-axis and Z-axis driving adopts FANUC high-performance servo motor, with high positioning accuracy and flexible and reliable action.
System:
The control system is FANUC 0iTF+, using high-performance AC spindle motor and servo motor.
Technical date | ||||
Spindle head | Type | FL220 h5 | ||
Spindle maximum speed | rpm | 3000 | ||
Max. Torque | N×m | 420 | ||
Spindle power | Kw | 15-18.5 | ||
Chuck diameter | mm | 250 | ||
Spindle bore | mm | 102 | ||
Front bearing diameter | mm | 140 | ||
Spindle bearing lubrication | Type | Grease | ||
Linear motion lubrication | Type | Oil | ||
Speed range | rpm | 5-3000 | ||
Work area | ||||
Maximum swing over bed | mm | 680 | ||
Maximum cutting diameter | mm | 465 | ||
Maximum cutting length | mm | 1000 | ||
Maximum bar capacity | mm | 75 | ||
Travel of Z-axis | mm | 1050 | ||
Travel of X-axis | mm | 260 | ||
Travel of Y-axis | mm | ±60 | ||
Ball screw | ||||
X/Y/Z axis ballscrew DxP | mm | 40 x 10/40 x 5/40 x 10 | ||
Feed | ||||
Rapid traverse Z | m/min | 24 | ||
Rapid traverse X | m/min | 24 | ||
Rapid traverseY | m/min | 12 | ||
Rapid traverse C | m/min | 100 | ||
Feed force | ||||
Feed force X/Z | N | 7500 | ||
Number of axis | 4 | |||
Measuring system | ||||
X/Y/Z axis measuring system | Absolute rotative | |||
(X/Y/Z);VDI/DGQ 3441 Positioning | mm | 0.008/0.008/0.01 | ||
(X/Y/Z);VDI/DGQ 3441 Repeatability | mm | 0.005/0.008/0.008 | ||
Tool attachments | ||||
Power turret | Type | BMT55 | ||
No. of tool stations Driven tools | # | 12 | ||
T-T time | sec | 0.25/0.5 | ||
OD tool size | mm | 25/40 | ||
Maximum speed of tool driven | rpm | 3000 | ||
Tool driven power | Kw | 3 | ||
Max. torque of tool driven | N×m | 45 | ||
Electrical specifications | ||||
Voltage | V | 380 ±10% | ||
Frequency | Hz | 50 ± 1% | ||
Max. installed power | KVA | 50 | ||
400v lie protection fuses | A | 100 | ||
Connection cables section | mm2 | 4 x 10 | ||
Hydraulic unit | ||||
Max. working pressure | bar | 50 | ||
Reservoir capacity | l | 35 | ||
Pump flow | I/ in | 24 | ||
Coolant system | ||||
Capacity with tank | l | 180 | ||
Pump delivery | l /min | 30 | ||
Pump pressure | bar | 5 | ||
Noise level | ||||
Less than | dB (A) | ≤80 | ||
Control system | ||||
FANUC | - | 0iTF plus | ||
Net weight | kg | 约 7800 | ||
Slant angle, Material | - | 45°, HT300 |
Product Categories : CNC Lathe > Slant Bed CNC Lathe
Premium Related Products
Other Products
Hot Products
Multifunctional CNC LatheChina Mini Lathe Machine Czk0640A CNC Lathe Drill Mill Tap CNC Machine PriceChina Mini Lathe Machine Czk0640A CNC Lathe Drill Mill Tap CNC MachineMini CNC Lathe Machine Ck6125 Small Size Lathe MachineCNC Pipe Thread Lathe Ckg1322A CNC Lathe MachineCNC Lathe Machine Ck6180W CNC Wheel Repair Lathe with Good Price From Taian HaishuHigh precision CNC planer Type boring miller mill planer borer machine price for saleHigh precision cnc vertical milling lathe machine for saleHigh precision used fanuc cnc milling machine for saleHigh precision cnc lathe lathes machine price for saleHigh precision Roll-turning lathe machine price for saleSingle Column NC Vertical Lathe with Elevating Railheavy duty large Horizontal Lathes machine price for saleHigh speed used haas cnc lathe diy metal latheHigh speed metal working lathe machine price for saleBridge Type CNC Milling Machine For Sale