IHT316 Engine Bench China Metal Cutting Miniature Steady Rest Mini CNC Teach Precision Lathe Machine,slant bed lathe
Product Description
IHT316 Engine Bench China Metal Cutting Miniature Steady Rest Mini CNC Teach Precision Lathe Machine,slant bed Lathe
CNC Lathe is a four-axis linkage, fully closed-loop CNC Machine Tool. The machine machine-electric-hydraulic integrated layout adopts a fully enclosed protective cover, the door opens to the left, a and the operating table is located on the right end of the fixed protective cover, and the ergonomic swing design makes the operation more convenient. Each servo feed shaft adopts high-speed silent ball screw, elastic coupling is directly connected, fast moving speed, low noise, high positioning accuracy and repeated positioning accuracy; the servo motor is equipped with an absolute value encoder, no cumulative error, no memory, No need to find a reference point, the position information will not be lost after the power is cut off. The Machine Tool has strong functions, high precision, reasonable layout, beautiful appearance, easy operation and convenient maintenance.
Overall: The machine tool has a mechanical, electrical, and hydraulic integrated layout. The 45° overall slant bed has the advantages of compact structure, high rigidity, smooth chip removal, and convenient operation. The guide rail type is a rolling guide rail, and the driving parts are high-speed silent ball screws. It has the advantages of fast speed, less heat, and high positioning accuracy; the machine tool is fully enclosed protection, automatic chip removal, automatic lubrication, automatic cooling.
Spindle: The main drive unit of this machine tool is driven by Japanese FANUC 11/15kw high-performance servo motor, which drives the spindle to rotate through a pair of pulleys. The spindle speed range is 30-4500r/min. The front support of the main shaft adopts three-set high-precision angular contact ball bearings, and the rear support adopts two high-precision angular contact ball bearings with large apertures to meet the bearing requirements of axial and radial cutting forces.
Tailstock:The Hydraulic Cylinder is used to drive the integral mobile tailstock. The structure is simple, with high precision, high rigidity and reliable performance.
Turret: The machine used servo hydraulic turret, with fast tool change speed and high reliability.
Drive:The X-axis and Z-axis driving adopts FANUC high-performance servo motor, with high positioning accuracy and flexible and reliable action.
System: The control system is FANUC 0iTF+, using high-performance AC spindle motor and servo motor.
Parameter | |
Spindle head | FL 140 h5 |
Spindle maximum speed | 4500 rpm |
Max. Torque | 112 N×m |
FANUC Spindle power | 7.5-11 kW |
Chuck diameter | 165 mm |
Spindle bore | 74 mm |
Front bearing diameter | 100 mm |
Spindle bearing lubrication | Grease |
Linear motion lubrication | Oil |
Speed range | 5-4500 rpm |
Work area | |
Center distance | 608 mm |
Maximum swing over bed | 558 mm |
Maximum cutting diameter | 340 mm |
Maximum cutting length | 355 mm |
Maximum bar capacity | 42 mm |
Travel Z/X | 380 /180 mm |
Ball screw | |
X/Z axis ballscrew DxP | 32 x 10 mm |
Feed | |
Rapid traverse Z/X | 30/30 m/min |
Feed force of axis | |
Feed force X/Z | 4500 N m |
Number of axies | 2 |
Measuring system | |
X/Z axis measuring system | Absolute rotative |
(X / Z);VDI/DGQ 3441 Positioning | 0.008/0.008 mm |
(X/ Z);VDI/DGQ 3441 Repeatability | 0.004/0.005 mm |
Tool attachments | |
Servo turret : INVESTA | No.of tool stations : 8 |
Tool attachment : 25 mm | Turret disk type : Slot disk |
Electrical specifications | |
Voltage : 380 ±10% V | Frequency :50 ± 1% Hz |
400v lie protection fuses : 50 A | Max. installed power : 20 KVA |
400v line automatic circuit breaker : 33 A | Connection cables section : 4 x 10 mm2 |
Hydraulic unit | |
Max. working pressure : 55 bar | Reservoir capacity : 35 l |
Pump flow | 24 I/ min |
Oil-based coln system | |
Capacity with tank | 100 l |
Pump delivery | 30 l /min |
Pump pressure | 5 bar |
Noise level | |
Less than | ≤80 dB (A) |
Control system |
|
FANUC | 0i-TF |
Net weight | About 3200 kg |
Vertical Machining Center Pipe Thread Lathe CNC lathe machine