Cheap CNC Oil Country Lathe QK1319A Pipe Thread Process Lathe Machine
Product Description
Cheap CNC Oil Country Lathe QK1319A Pipe Thread Process Lathe Machine
What Is The Specifications of Pipe threading lathe?
Detailed description of pipe thread lathe:
This Machine Tool is specially designed to adapt to the use of my country's oilfield, geology, mining, chemical and agricultural irrigation and drainage departments. The use-type pipe thread lathe is more economical and convenient than ordinary lathes. It can efficiently complete the cutting processing of various straight pipe threads and tapered pipe threads, such as pipe joints, tie rods, casing pipes, pipeline pipes, mine pipes, water pump pipes, etc. The characteristics of petroleum geology, mining, chemical industry and agricultural irrigation and drainage departments, this machine tool can also process various inch, metric, touch thread, turning various shaft and disc parts, and play the role of ordinary lathe. This machine is indeed petroleum The ideal machine tool for the sectors of, geology, chemical industry and agriculture.
CNC Lathe Main Feature:
1. It can process internal and external straight pipe threads and taper pipe threads with a pipe thread diameter of 193 mm.
2. The lathe is equipped with a taper device capable of processing taper 1:5.
3. Metric and inch threads can be turned without changing gears.
4. There is a falling worm in the slide box, which can automatically protect the integrity of the lathe mechanism.
5. The guide rail is quenched and wear-resistant treatment and finishing treatment.
6. With high power, it can handle heavy load and powerful cutting.
7. The floor-to-ceiling center frame can be moved at will according to the user's needs. The center frame is equipped with a long tube clamping adjustment mechanism, so the labor intensity is greatly reduced.
8. There are four-jaw chucks at the front and rear of the front box, which are suitable for the wishful clamping of long and short tubes.
Model and specifications | QK1313A | QK1316A | QK1319A | QK1327A |
Span of guideway | 460 mm | 550mm | ||
Max.swing over bed | 600mm | 1000mm | ||
Max.swing over carriage | 340mm | 540mm | ||
Tube outside diameter | 30-127mm | 50-155mm | 50-196mm | 100-275mm |
Max. length of workpiece | 1500/3000mm | |||
Max. length of turning | 1350/2800mm | |||
Max. load of Lathe bed | 3000kg | 5000kg | ||
Spindle bore(dia) | Φ130 mm | Φ160mm | Φ200mm | Φ280mm |
Mode of spindle speed | Two gears variable frequency stepless speed regulation | |||
Range of spindle speed | 20-800r/min | 20-600 r/min | 20-450 r/min | 10-300 r/min |
Power of main motor | 11KW | 15KW | ||
Power of main motor | 3 Φ320 | 3 Φ400 | 3 Φ500 | 4 Φ800 |
Rapid speeds of X/Z-axis: 3000/6000mm | Minimum feed increament of X-/Z-axis : 0.001/0.001mm | |||
Max.travel of X/Z axis | 340/1350-2850mm | 400/1350-2850mm | ||
Turret type | V4 240 | V4 280 | ||
Section of tool shank: 32/32mm | Bed quenching hardness : ≤HRC55 | |||
Turret indexing time: 3s | Lndexing repeatability: 0.008mm | |||
Diameter of tailstock quill : 100/250mm | Taper hole of tailstock quill : Morse 5 | |||
CNC System | GSK980TC3(Standard Configuration) | |||
Optional: SINUMERIK 808D /FANUC Series Oi-TF | ||||
X/Z axis motor torque | 10/15N.m | 15/22N.m | ||
Workpiece accuracy: IT6~7 | Roughness : Ra1.6 | |||
Length/Width/Height | 3900-5400/2000/2100mm | 4800/2280/2400mm | ||
Machine weight | 4500kg | 8800/10500kg |
Cheap CNC Oil Country Lathe Machine QK1319A pipe thread process machine
The digitally-control pipe threading lathe,a special tool to turn and mill pipe threads,characterized by larger diameter of the spindle bore(over 130mm in general) and chucks installed before and behind the head stock so as to hold and process tubular or rod pieces of latge diameters. In addition to milling cylindrical/conical SI/BS pipe threads,it can be used to replace the general lathes to mill outer diameters,bore holes,and planes.It is widely used to process working pieces such as drilling pipes/collars and casing in the sectors such as petroleum,smelting,chemistry,hydropower and geologic exploration.
We use electric furnace smelting, resin sand molding casting technology,avoid sand holes, stoma casting internal defect effectively, all the accessories are assayed by imported spectrum analyzer, it assures the quality of the casting . The casting had been through second thermal aging treatment with good stability.
we can can absolutely ensure the casting quality after the United States imported equipment precision spectrometer analysis.
The bed of floor type is the whole structure. The rigidity and width of guide way on the bed of lathe is good enough. The guide way is through high-frequency quenching, the slide guide way joint SD compound soft belt. to make more wear-resisting and lower friction factor. The lead screw is the whole structure (not butt). The saddle is wider and thicker than before, the machine is running more stable. And the cutting ability is better.
With the super audio quenching treatment ,the hardness of Body guide rail can reach above HRC55 degrees, it can keep the hardness high accurate, and prolong the wear resistance and service life.
The 3 boxes of lathe were processed by Taiwan’s CNC Boring and milling machine center. The other tools are processed by CNC lathe and machine center to ensure the precision of the box and tools.
The lathe bed we produced is all research and development by our own engineers. These all can greatly increased the rigidity and are helpful to widen and Thicken the dragging plate,
The large plate guide guide rail (X) is also go through the super audio quenching treatment, so it increased hardness and then could guarantee the service life of equipment more efficiently.
The equipment will firstly tested by the laser interferometer imported from Britain to test repeated positioning accuracy of X, Z direction in order to make sure the accuracy. Then the whole machine will be tested according to the National standard whole machine.
Our enterprise have got the ISO9001-2008 quality system certification and the European Union CE certification.
What Is The Application Field of Pipe Threading Lathe?
1. DRC research and develop Pipe threading lathe for more than 50 years, and our company was restructured in the year 2002 . More than 200 staff ,9 professional engineers ,cover an area of 120,000 square meters.
2.CNC Pipe Threading Lathe is a special model of CNC turning lathe ,mainly used in oil and gas field, machinery manufacturing, geological exploration, thread repair function and so on.
3. Customized service, we can make the pipe threading lathe according to clients’ requirements.
4. We have our own casting workshop, guarantee good quality of the machine.
5. A big production capacity, always have machines in store, though so many orders we can also guarantee delivery time.
6. Certificate of CE and ISO
7. We have exported to Dubai , Malaysia,the USA ,Russia, etc.
8. We make OEM for Knuth Germany about 8 year ,no quality problem , the orders are added every year.
What Is The Details Of DRC's Pipe Threading Lathe?
1.DRC use electric furnace smelting, resin sand molding casting technology,avoid sand holes, stoma casting internal defect effectively, all the accessories are assayed by imported spectrum analyzer, it assures the quality of the casting . The casting had been through second thermal aging treatment with good stability.
2.The bed of floor type is the whole structure. The rigidity and width of guide way on the bed of lathe is good enough. The guide way is through high-frequency quenching, the slide guide way joint SD compound soft belt. to make more wear-resisting and lower friction factor. The lead screw is the whole structure (not butt). The saddle is wider and thicker than before, the machine is running more stable. And the cutting ability is better.
3.The 3 boxes of lathe were processed by Taiwan’s CNC boring and Milling Machine center. The other tools are processed by CNC lathe and machine center to ensure the precision of the box and tools.
4.First step of the accuracy test of the equipment is testing the repeat accuracy of X and Y axis with Renishaw laser interometer imported from Britain. After that, inspecting and accepting the whole equipment based on the enterprise standards, guarantee the accuracy of the machine tool.
( More Detailed Picture of Pipe Threading Lathe )
What Is The Historical Order Of DRC?
Below are some orders , click the photo to get more information.
Who Is DRC?
DRC is a group company ,which is professional in products and sales of advanced CNC Machine tools . Acting full operation of the six machine tool production company's overseas sales.
DRC is located in Dalian, which is one of the largest seaport cities of China.Our products exported to Russia, Dubai, Hungary, Italy, Argentina, the Philippines, India, more than 50 countries.
DRC has six factories in China, which covers many kinds of mechanical equipment.
Product Range:
Lathe
CNC Lathe
Conventional Lathe
Vertical lathe
Machining Center
Wheel Repair Lathe Machine
Planer & Slotting Machines
Boring and Milling machine
Laser Cutting Machine
Special Machine for Pipe Threading Lathe, Valve Milling, End Facing Machine and so on
Send your Inquiry Details in the Below , Click "Send" Now !
Product Categories : Conventional Pipe Threading Lathe > CNC Pipe Threading Lathe